32-487SF DCC SOUND Class 40 D213'Andania' BR Green Loco. Brand new model from our new Yorkshire model railway shop.
Analogue Users: Please note that normal load running sounds and any other automatic or randomised sounds will also operate when this model is used on analogue control (DC) straight from the box! With the DCC decoder interface upgraded to Plux22; new lighting features and enhanced speaker arrangements have also been employed on the Class 40 to enhance the operating experience - all of which can be enjoyed out of the box with this SOUND FITTED model. On track the model has a mighty presence, just like the real locomotives and, with its five pole, twin flywheel motor powering all six driving wheels, you can be sure of a performance to match too. This Class 40's good looks are enriched by the superb livery application using true-to-prototype colours, fonts and logos to produce a model fit for any collection.Pristine BR Green (Small Yellow Ends) livery. SOUND FITTED - Fitted with a ESU V5DCC Sound Decoder - See below for the function list.
DETAIL VARIATIONS SPECIFIC TO THIS MODEL. Disc Headcodes (Discs supplied in the Accessory Pack). Stones Boiler Port on Roof (with optional blank supplied in the Accessory Pack). Cantrail Grilles Arranged as appropriate to a locomotive with a Stones Boiler. Fitted with Multiple Working Equipment.
Fitted with Dual Brakes (Air Pipes fitted). Etched Frost Grilles (optional part supplied in the Accessory Pack). BACHMANN BRANCHLINE CLASS 40 SPECIFICATION. Five pole, twin shaft motor with two flywheels providing drive to both bogies. Authentic 1Co-Co1 drive arrangement with six axle drive.
Separate metal bearings fitted to each driven axle. Gearing arranged for prototypical running speeds and haulage capabilities.
16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing. NEM coupling pockets to NEM362 standards integrated into each bogie. Designed to operate on curves of second radius (438mm) or greater.
Bogies fitted with separate steps and sandboxes. Separately applied metal detail parts, including grab handles, sand pipes and etched fan grilles. Pre-fitted driver in one cab.Each model is pre-fitted with a full set of decorated, model-specific buffer beam pipework and accessory parts. Directional lighting, including headlights and high intensity headlights where applicable, switchable on/off at either end on DCC or Analogue control. Cab lighting, assigned to two DCC functions for separate switching of each.
Authentic light colours and temperatures selected for each model based on era and application. Two quality speakers employed for optimum sound reproduction, fitted to every model as standard. ESU Loksound V5DCC Sound Decoder fitted to SOUND FITTED versions. Sound files produced specifically for the Bachmann Branchline Class 40 using recordings from real locomotives. SOUND FITTED models operate on DCC and Analogue control as supplied.
On Analogue, an authentic engine start up sequence and running sounds are produced when power is applied. Authentic liveries applied to all models. Multiple paint applications employed on each model using BR and corporate specification colours. Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours.
In addition, where applicable Etched Nameplates and Plaques are also provided. F0 - Directional Lights - On/Off (plus Light Switch Sound). F1 - On - Warm Engine Start / On, Off - Failed Engine Start / On, Off, On - Cold Engine Start.
F6 - Coasting (Manual notch Down if F22 On). F7 - Maximum Revs (Manual notch Up if F22 On).F8 - On - Coupling Up / Off - Uncoupling. F9 - Flange Squeal (Speed Related). F11 - On - Guard's Whistle / Off - Driver's Response Horn. F12 - Cab Lights On/Off No. 1 End (plus Light Switch Sound).
F13 - Cab Lights On/Off No. 2 End (plus Light Switch Sound). F14 - High Intensity Headlight (if fitted, F0 must be ON). F15 - Auto Uncouple Cycle.
F18 - On - Sound Fades Out / Off - Sound Fades In. F19 - Mute (Latch) / Volume Cycles 6 Levels (Trigger). 1 End (Fan) Directional Lights Off. 2 End (non-Fan) Directional Lights Off. F22 - Manual Notching Logic On/Off (control with F6 & F7).
F25 - On - Driver's Door Open / Off - Driver' Door Shut. Alternative Horn sounds and behaviour can be selected via CV changes. Alternative coupling sounds can be selected via CV changes. The British Rail Class 40 is a British Railways diesel-electric locomotive, rated at 2,000 hp and classified as a Type 4. A total of 200 were built by English Electric between 1958 and 1962 and numbered in the series D200-D399.
They were for a time the pride of the British Rail early diesel fleet. The final locomotives ended regular service in 1985. Class 40s operated in all areas of British Railways although Western and Southern Region workings were less common.
After the early trials, the majority of Class 40s were based at depots in northern England; notably Longsight, Carlisle Kingmoor, and Wigan Springs Branch on the Midland Region, and Thornaby and Gateshead on the Eastern Region. The heyday of the Class was in the early 1960s when they hauled top-link expresses on the West Coast Main Line and in East Anglia. As additional new rolling stock was introduced, their passenger work decreased, partly due to their lack of electric train heating for newer passenger coaches.
This resulted in visits to many distant parts of the network. It would be fair to say that few routes in the London Midland and Eastern regions did not see Class 40-worked passenger services from time to time.
Regular destinations included the seaside resorts of Scarborough, Skegness and Cleethorpes on the Eastern region, with Blackpool and Stranraer being regularly visited on the West Coast.